User`s manual

1.2.2 VoIP Function
1.2.2.1 VoIP Setup/ Port Status/
This page will display the current and last time VoIP call status & result.
a. The PC time : will show the date & time that your connected PC now.
b. The VoIP Router time : will show the date & time on this VoIP router, the
date& time may get from SNTP server or setting from your PC. You may set
the SNTP server from /System Setup/Administrator/Date & Time/.
A. Ports Message
a. Port: display the port number, e.g. 1 or 2.
b. Type: Telephone interface type:
 FXO: (DAA interface) for connect to telephone line or PBX extension
line.
 FXS: (SLIC interface) for connect to regulate phone set.
c. Display Name: display the remote party name of this VoIP call.
d. Status: Current status of this port.
 Idle: Standby for make a phone call.
 Signal: Waiting for DTMF press or VoIP protocol connecting.
 In: There is a phone call made from phone port and call out to Network
by VoIP.
 Out: There is a phone call made from Network VoIP and pick up by
phone set.
e. Connected IP: The remotely party IP of this VoIP call.
f. Caller ID: Caller ID received from telephone line port.
g. Start Time: Date & time of this VoIP call begin on this port.
h. End Time: Date & Time of last VoIP call End on this port.
7