User`s manual

32
1 PF1 ON G.723.1 ON Out band ON 3 ON
00001 H.323 1001 E.164 Delete
2 PF2 ON G.723.1 ON In band ON 3 OFF
00002 H.323 1002 E.164 Delete
When VoIP call in number with prefix 1 will use the Profile named PF1
( H.323 ID1 = 0001, E.164 ID=1001, DTMF Relay=Out band, Q.931 Fast
Start=ON) to answer the VoIP Call in.
When VoIP call in number with prefix 2 will use the Profile named PF2
( H.323 ID1 = 0002, E.164 ID=1002, DTMF Relay=In band, Q.931 Fast
Start=OFF) to answer the VoIP Call in.
When VoIP call in number with prefix 3, because there is no Profile assigned,
it will use the default value for VoIP Call Out.
n. Forward: Define the profile name for forward the unanswerable VoIP call
on this Call In rule. Please input the name you defined on the
/Voip
Setup/Routing Setup/ Forwarding/ .
Example: if user set the VoIP Call in & Forward Profile like below:
Index Area Code Strip Prefix Maximum Minimum From To LineNo Gatekeeper Alert Profile Forward Delete
1 601 1 1 CF1 Delete
2 602 2 2 CF2 Delete
Other: 10.1.1.1/104
No. Name Always OnBusy No Answer No Answer Sec Delete
1 CF1 hk.big.com/301 Delete
2 CF2 assist.big.com assist.big.com/610 30 Delete
In this case, when the VoIP router received a VoIP call in number with prefix
501 ( not 601 or 602 prefix defined on Call In Routing table), it will forward
this call to the IP & number defined on Other filed(in this case,
10.1.1.1/104, it mean it will forward this call to IP 10.1.1.1 and calling