User`s manual

GK2_3_1

2 gk2_3_1 Delete

3 GK_ALL 3 gk Delete

By Index 1, if user input any phone number with prefix code is 1, The VoIP

Router will call out via Gatekeeper 2.

By Index 2, if user input any phone number with prefix code is 2, The VoIP

Router will try to call out by Gatekeeper 2 ( if register to Gatekeeper 2 is

successful), if Gatekeeper 2 is not available, it will check Gatekeeper 3, then

check Gatekeeper 1.That mean if register to gk2 is failure and register to gk3 &

gk1 is successful, the VoIP router will call out via gk3.

You can check the Gatekeeper register status on /VoIP Setup/Register

Server/Register Status.

f. Call to different IP port

The default IP port used by VoIP router is 1720 for H.323 and 5060 for SIP, if

work with remote side of VoIP Router or gateway is change another port

number for VoIP, please assign another port number after destination IP or URL.

Please make sure both side use same port number for VoIP call, otherwise it can

not make call. You can change the VoIP router default listen port on .

Index Remark Area Code Min Digits Max Digits IP Address Strip Prefix Profile Delete

1 Port_1719 1 10.1.1.1:1719 Delete

2 Port_8495 2 China.proxy.com:8495 Delete

g. Profile:

Define the optional special VoIP parameters when calling to the destination.

Please input the name you

defined on the profile (/VoIP Setup/Routing

Setup/Routing Profile/) list.

Example: if user set the VoIP Call Out & Routing Profile like below:

Index Remark Area Code

Min Digits Max Digits

IP Address Strip Prefix Profile Delete

1 UsePF1 1 gk1 PF1 Delete

2 UsePF2 2 10.1.1.2 PF2 Delete