User manual

8. IP PBX Configurations by Web Browser

You may enter the IP address from PC Web browser to configure UTG7204-ON. For example, enter

http://192.168.1.1 from IE web browser to display login page as follows. Note that UTG7204-ON

supports auto-MDIX function for LAN port. A beginning user of UTG7204-ON may click Setup

Wizard to configure the IP PBX step by step for web configurations.

1). Please enter the default IP address

http://192.168.1.1 from PC Web browser.

The following Web page shall be displayed on PC. If you have difficulties accessing the

Web page from the PC Web browser, the subnet IP of PC might be different from

192.168.1.xxx. In this case, please refer to Chapter 9 for trouble shooting.

2). Please enter the username and password into the blank field. The default settings are:

Username: admin

Password: 123456

3). Click the “Login” button to enter the UTG7204-ON for web configurations.

Whenever you change the setting in each Web page, remember to click the “Submit” button

to save into the non-volatile memory and click the “Reboot” button to activate the new

settings.

WAN & LAN Network IP Address and Mask

NIC IP Address Mask

WAN 192.168.139.3 255.255.255.0

LAN 192.168.1.1 255.255.255.0