User manual

8.2.10 Time-Zone Setting
System date and time can be set in this section. The time will be recorded for use of CDR, or the CDR
may record wrong timing if the system date and time are not set. The Network Time Service can be
enabled to synchronize with NTP server. You still need to set the TimeZone, Date, and Time. It will
display the synchronized NTP time when you re-enter this setting.
Press Submit to save the configurations, and press Reboot to activate the new configurations.
8.3 Incoming Calls Setting
The IP PBX provides two ways of incoming calls; one is from local PSTN through the FXO ports, and
the other is from the calls from ITSP. In some case, the ITSP may provide the real PSTN numbers
for the IP PBX from the VoIP.
8.3.1 Calls from FXO ports
The IP PBX provides 4 FXO ports to allow PSTN incoming calls. For any PSTN incoming calls, you
may configure to redirect to either switchboard, extension number, or conference room, etc.
31