User manual

8.2 System

The UTG7204-ON IP PBX System configurations can be set in this section. The settings include

Server Ports Setting, Rate Setting, DMZ, TrustHost, Music on Hold, Hotlines, Admin Account,

USB_Disk Setting, Voicemail Setting, and Time Zone.

8.2.1 Server Ports Setting

The SIP port number is default at 5060 for VoIP Applications. Note that the SIP port number must be

the same for all the IP-PBX and VoIP phones and TAs. The encrypted port can be used for VoIP

encryption. The user may enable encryption, such as CBCOM, to registered into UTG7204-ON.

HTTP Port : HTTP port number, default at 80.

SIP Port : Default at 5060 .

Encrypt Port : Support SIP packet encryption with VoIP Phones and ATA.

RTP Ports Range : RTP port for VoIP voice packets. Default at 10000~20000.