User manual

Call Waiting Setting:
8.25. When call waiting is set ON, you will hear an interrupt “dodo” tone over the phone to remind
that there is an incoming call from the third party.
Soft Key Setting
8.26. You can configure the pickup and VMS key setting to co-work with IP PBX in this page.
Pick Up & Voice Mail
8.27. UTG7100-IP may pick up the incoming call for another UTG7100-IP when registered in the
same IP PBX. When you hear other UTG7100-IP is ringing, you may pick up you phone and press
Pick Up function key to answer for that UTG7100-IP . You may press the Speaker Phone key then
Pick Up function key as well.
8.28. When registered in IP PBX with incoming voice message, the LED VMS will start flashing. To hear
the message you may press the Speaker Phone key then VMS function key. You may also pick
up the phone and press VMS function key.
16