Product Manual

Incorporated in Queensland A.C.N. 010 809 168 A.B.N. 81 010 809 168
BRISBANE
11-15 Oasis Court, Clontarf, QLD 4019
Phone : [phone] Fax : [phone]
E-mail : [e-mail]
www.aussietraveller.com.au
MELBOURNE
235A Barry Road, Campbellfield VIC 3061
Ph: 03 9357 6565 Fx: 03 9357 6515
E-mail: [e-mail]
Tips for fitting：Use a magnetic tip screwdriver to hold screws when joining inner and outer
frames.
Special Note:
1. The window supplied is suitable for a flat wall. For Caravans/Motor Homes etc finished with
profiled wall cladding, use a closed cell foam tape or suitable sealant to provide a waterproof
fit. If using sealant remove the rubber outer seal provided before fitting.
2. Normal Inner frame is suitable for 24-34mm wall thickness. For the wall thickness less than
24mm or more than 34mm, it is necessary to specify wall thickness when placing the order.
Diagram 6
Step 4: Open top and bottom blind panel cover by lifting up/pulling down at corners,
fix the blind panel to wall with ST4.2x32 screw as per Diagrams 5&6. Finally
close the cover by hand.
Diagram 5
Diagram 8
Diagram 9
Diagram 7
Optional Accessory:
Curtain Track Assembly Kit
Easily add a customized
curtain to any window.
The curtain track length is
W+200mm. Kit comes with
all fittings required to add
curtains.