User manual

Connectors, LEDs and jumpers

Issue E 87

JP4 – LVDS MSL selection

Connector: 2-way, 2.54mm (0.1") through-hole header

Pin Signal name

1 MSL

2 3.3V

This is an optional LVDS Mode select signal (routed to LVDS connector J16, pin 20).

JP4 Description

MSL set to ‘1’

MSL set to ‘0’ (Default)

JP5 & JP6 – CAN bus termination

Connector: 2-way, 2.54mm (0.1") through-hole header

JP5 JP6

Pin Signal name Pin Signal name

1 CANH 1 Centre tap

2 Centre Tap 2 CANL

JP5 & JP6 Description

62Ω Termination connected

62Ω Termination disconnected

(default)

Only insert jumpers JP5 and JP6 if the ZEUS is at the end of the network.

JP6

JP5