Datasheet

ZEUS Embedded Linux Development Kit Quickstart Getting started

What peripherals are supported?

Linux supports the following peripherals in this release:

• Seven UARTs: COM1 through to COM7 (includes the processor’s internal FFUART,

BTUART and STUART, and support for the wireless modem and GPS receiver).

• On-board Flash with JFFS2.

• Ethernet interfaces.

• Audio codec.

• Flat panel display.

• Battery backed SRAM.

• Real time clock.

• Watchdog.

• PC/104 expansion bus. Drivers are available for a range of Eurotech and third

party PC/104 boards.

• USB 1.1 host controller.

• CF+ socket.

• SD Memory cards.

• Analog Touchscreen.

• I

• GPIO.

• Temperature sensor.

Unsupported hardware features

The USB client controller, CAN controller, power management and Quick Capture

Camera Interface are not yet fully supported under Linux on the ZEUS.

ZigBee is not supported as part of the standard development kit. Please contact

Eurotech Ltd to discuss ZigBee options and solutions.

The ZEUS Linux Development Kit is part of a continuous process of development.

Please contact a member of the technical support team for the latest drivers. See

Appendix A - Contacting Eurotech Ltd

on page 37.