User guide

Installation and Setup
7
BRI ISDN Gateway User Guide
www.eurotech-communication.com
 ISDN cable - The ISDN cable is used to connect the system to the ISDN network.
 Power Supply Cable - Connect the power supply cable from your 110-240V 50-60Hz power
outlet to the BRI Gateway power connector/adapter.
 COM Cable RS323 – The RS-232 serial connection cable between the BRI and
the PC is used for configuration with the BRI Management Application.
 Antennas – Connect antenna cable per port.
Position the antennas at least 40 centimetres apart and more than 1.5 meters from the
Gateway.
2.4. SOFTWARE INSTALLATION
Configuration is performed on an auxiliary computer by installing the BRI ISDN Management software
CD for MS-Windows Application.
 To install the BRI ISDN Management Software on a MS-Windows PC
1) Insert the BRI ISDN Management Installation CD into the CD drive of the PC.
2) Navigate to the installation CD drive.
3) Double-click setup.exe.
4) Click Next. The Destination Folder appears.
5) Select the destination folder by clicking Change and navigating to the destination.
6) Click Next.
Power
Supply
COM PORT
ISDN
Synchronization