User guide

Installation and Setup
5
BRI ISDN Gateway User Guide
www.eurotech-communication.com
2. INSTALLATION AND SETUP
This section will guide you through the installation and setup process, including basic configuration and
a system test to ensure that all components are working properly. These steps are MANDATORY to run
the BRI ISDN unless otherwise indicated.
After completing this section your Gateway is functional for basic operations. You may choose to make
further configurations.
2.1. INSTALLATION OVERVIEW (GETTING STARTED)
Perform the following steps to install and setup your system:
1) Check the items delivered in your package - see Check the Package Items on page 5.
2) Install SIMs. See Hardware Installation on page 5.
1) Connect cables, attenas and power supply. See Connecting Cables on page 7.
3) Install the PC management application using the CD provided - see Software Installation on page 7.
4) Power up the Gateway.
5) Perform basic setup - see Basic System Setup (Basic Operations) on page 9.
2.2. CHECK THE PACKAGE ITEMS
Make sure that your package contains the following components before installation:
 Main Hardware Device - The BRI ISDN Gateway
 Quick Installation Guide – for brief installation explanations
 Software Installation CD - Gateway Manager CD for MS-Windows Management Application. Includes
the User Manual file and additional auxiliary utilities.
 Cellular Antennas
 ISDN Connection Cable
 RS-232 Serial PC Comport (COM) connection cable (RJ-45 to RS-232 COM). This facilitates
configuration and monitoring of the gateway. This is referred to as the ‘Com Cable’ in this manual
 Input: 110/240V 50-60Hz, Output:12v DC adapter
2.3. HARDWARE INSTALLATION
This section describes the hardware installation.
2.3.1. HARDWARE OVERVIEW
The BRI ISDN Gateway consists of three main parts:
 Chassis – Housing the gateway PCB.
 Master Card – Located at the left side of the unit. contains the ISDN,COM, Synchronization
connections