User guide

Appendix A: TCP/IP Setting
30
BRI ISDN Gateway User Guide
www.eurotech-communication.com
5) Double click on the IP, then select the Network tab.
The next screen will open:
6) Check the Modify check box above the IP Address and enter the desired IP, click the Modify below
to change Netmask and other settings; after you made changes, click the OK button.
7) Close the Network Enabler.
8) Click Connect button in the BRI Management.
9) Select TCP/IP in the Connection Mode.
10) Enter the IP Address and the Port Number (the default is port 4001).
11) Click OK to connect to the BRI Gateway via the TCP/IP.