User guide

ISDN and Time Settings
17
BRI ISDN Gateway User Guide
www.eurotech-communication.com
 System Version is the version of the master card software in the PCB.
 The ISDN module is a small PCB connected to the master PCB. The ISDN module has
an EEPROM containing ISM software.
 ISM version - the version of the ISM software.
 Select NT or TE in the Network access box.
 Select Point to Point or Point Multipoint in the Connection mode box.
 In the Incoming Calls box, select the interface of incoming calls (from the switching unit to
the ISDN card), Overlap (pulse) or In Block (packet), in conformity with the setting in the
switching unit.
 Mode of Incoming calls processing is the mode of earring the ring back tone. In Real
Processing you will ear it at the begging of the call from the GSM network, in Imitation
Processing the ring back will begin automatically at the end of the alerting timer.
5) If you have more than one Winner Series BRI Gateway on site, enter the address of each Winner
Series BRI Gateway unit in System Identification Number.
This entry can accept number between 1 and 9 digits.
6) If you have sub-addresses of Winner Series BRI Gateway, enter the sub address of each
Winner Series BRI Gateway unit in the second box, 1 digit.