Datasheet

VIPER Embedded Linux Development Kit Quickstart Unpacking and connecting up

5 Configure the serial terminal as follows:

115200 baud. •

•

No parity.

8 data bits.

No handshaking.

6 Switch on the VIPER board once the terminal emulator is set up on the host PC.

What happens next depends on whether you have a basic RedBoot Development

Kit, an AEL Development Kit or a CYCLOPS:

If you have a RedBoot Development Kit, you are dropped to the RedBoot

command prompt, where you can upload and execute your application. For

more information see page 13

and the AEL Technical Manual, which is in the

/manuals/ folder on the Development Kit CD.

-or-

If you have an AEL Development Kit or CYCLOPS, the Linux operating system

is loaded from the on-board Flash array, and the board displays a Linux

prompt.

•

For a description of AEL see page 15

and the AEL Technical Manual, which is

in the /manuals/ folder on the Development Kit CD.