Datasheet

VIPER / VIPER-Lite Embedded Linux Development Kit Quickstart Unpacking and connecting up

3 Fit the VIPER / VIPER-Lite power supply cable to the plug on the board.

4 Connect a serial terminal emulator

to COM1 using the supplied null modem

adaptor and cable.

5 Configure the serial terminal as follows:

•

115200 baud.

No parity.

8 data bits.

No handshaking.

6 Switch on the VIPER / VIPER-Lite board once the terminal emulator is set up on

the host PC.

The Linux operating system is loaded from the on-board Flash memory, and the

board displays a Linux prompt. For a description of AEL see page 16 of the AEL

Technical Manual, which is in the /manuals/ folder on the Development Kit CD.

Such as ‘minicom’ running on a Linux PC or ‘Hyper Terminal’ on a Windows PC.