Datasheet

Software examples 38
An0065. CPU-1450 Soft Power Management
5. To verify the Wake-On-LAN functionality now you need to send to the CPU a Magic Packet via
Ethernet. This may be done using specific software, for example under Linux you can use the
EtherWake program with the following syntax:
Where ethxx is the host Ethernet adapter where the CPU is connected, the XX:XX:XX:XX:XX:XX field is the
MAC address of the CPU ; the program send a magic packet stream on the Ethernet cable compliant to the
AMD magic packet specification.
If you don’t have the ether-wake utility please refer to the bibliography.
Ether-wake -i ethxx XX:XX:XX:XX:XX:XX