User's Manual

Contents DynaGATE 10-12 User manual Rev. 2-1
12.18 How to know the programmable pushbutton status 88
12.19 How to read the Vehicle Ignition Sense status 88
12.20 The TPM and the tpm2-tools package 88
12.21 Optional: How to manage the ReliaCELL power supply 89
13 How to compile custom software 91
13.1 How to setup the toolchain 91
13.2 How to use the toolchain to compile custom software 91
14 Eurotech Everyware IoT 93
14.1 Everyware Software Framework (ESF) 93
14.2 The ESF Web UI 94
14.3 The ESF Wires application 95
14.4 Everyware Cloud (EC) 96
14.5 For more information 96
15 Mechanical specifications 97
15.1 Product mechanical dimensions 97
16 How to install the product 99
16.1 How to install the product 99
17 Power supply. How to turn ON/OFF and reset the product 101
17.1 Power supply specifications 101
17.2 Power IN connector specifications 101
17.3 How to supply power and turn ON the product 102
17.3.1 Note about the Vehicle Ignition Sense 103
17.4 How to turn OFF the product 103
17.5 How to reduce the power consumption of the product 103
17.6 How to hardware reset the product 103
18 How to maintain the product 105
18.1 How to safely remove the power supply 105
18.2 How to verify the installation of the product 105
18.3 How to clean the product 105
Appendix 1: Advanced boot options 107
1.1 Advanced boot options availability 107
1.1.1 How to configure a boot option 107
1.1.2 How to gain access to the Bootloader CLI 107
1.1.3 How to change the default boot option 108
1.2 The production fitImage 108
1.2.1 How to define the variants 108
1.2.2 How to manually configure the system to boot from a different DTB within the current fitImage 108
Appendix 2: Expansion connector pin map with respect to device tree pin assignment 111
Notes 113
8 / 114