User's Manual

DynaGATE 10-12 User manual Rev. 2-1 9 Interfaces in detail
9.10 TTL Serial Console
The DynaGATE 10-12 provides a 3.3 V TTL compatible Serial console in the Service Panel.
The voltage levels are as follows:
l Log 1 (Hi): 2.0 to 3.3 V
l Log 0 (Low): 0 to 0.8 V
For more information see: "How the TTL Serial Console is exposed" on page74.
9.10.1 TTL Serial Console connector specifications
Connector Layout:
Connector Specifications:
l Shrouded header
l Gender: Male
l Type: Pitch 1.25 mm; 3-pin
Mating Connector Specifications:
l Connector Housing
l Gender: Female
l Type: Pitch 1.25 mm; 3-pin
l Example:
Manufacturer: Molex
Part Number: 51021-0300
(or equivalent)
Connector Pinout:
Pin # Signal Type Description
1 GND P Ground
2 TX O Transmit Data
3 RX I Receive Data
61 / 114