User's Manual

9 Interfaces in detail DynaGATE 10-12 User manual Rev. 2-1
9.5.6 COM 0 and COM 1 connector specifications
Connector Layout:
Connector Specifications:
l Base strip, Header
l Gender: Male
l Type: 10-pin, 3.5 mm pitch
Mating Connector Specifications:
l Pluggable screw terminal block;
l Gender: Female
l Type: 10-pin, 3.5 mm pitch
l Example:
Manufacturer: Shenzhen Connection Electronics Co., Ltd.
Part Number: MC 1,5/10-STF-3,5 - 1847204
(or equivalent)
Connector Pinout:
Pin # Signal Type Description
1 COM 0: Y/D+ O COM port 0:
l RS-422: TX+ (Y)
l RS-485: A (D+ Line)
2 COM 0: Z/D- O COM port 0:
l RS-422: TX- (Z)
l RS-485: B (D- Line)
3 COM 0: IGND P
Ground (isolated)
4 COM 0: A/D+ I COM port 0:
l RS-422: RX+ (A)
l RS-485: A (D+ Line)
5 COM 0: B/D- I COM port 0:
l RS-422: RX- (B)
l RS-485: B (D- Line)
6 COM 1: TX/D- O COM port 1:
l RS-232: TX
l RS-485: B (D- Line)
7 COM 1: RX/D+ I COM port 1:
l RS-232: RX
l RS-485: A (D+ Line)
8 COM 1: GND P Ground (not isolated)
9 COM 1: RX/D+ I COM port 1:
l RS-232: RX
l RS-485: A (D+ Line)
10 COM 1: TX/D- O COM port 1:
l RS-232: TX
l RS-485: B (D- Line)
56 / 114