User's Manual

DynaGATE 10-12 User manual Rev. 2-1 9 Interfaces in detail
9.2 Internal Cellular Modem (all vers. except: -61, -62)
The DynaGATE 10-12 supports the following Telit LE910 modem variants, according to product versions
based on the geographic area of usage:
Product version Modem variant Technology
-63, -65 Telit LE910-NA1 - North America LTE Cat 1 3G Fallback
-64, -66 Telit LE910C1-EU - Europe LTE Cat 1 2G/3G Fallback
-67 Telit LE910C1-AP - Japan LTE Cat 1
The antennas connectors are placed on the front side.
For more information see: "How to manage the Internal Cellular Modem" on page71.
9.2.1 Internal Cellular Modem specifications (according to product versions)
9.2.1.1 Product features
l Rx Diversity and MIMO DL 2x2
l LTE FDD Cat.1, 3GPP compliant
l Built in UDP/TCP/FTP/SMTP stack
9.2.1.2 LTE data
l Uplink up to 5 Mbps
l Downlink up to 10 Mbps
9.2.1.3 Supported RF bands
TELIT LE910 variant Technology 4G bands 3G bands 2G bands
LE910-NA1 - North America LTE Cat 1 (NA) 3G Fallback B2, B4, B5, B12/B13 B2, B5 -
LE910C1-EU - Europe LTE Cat 1 2G/3G Fallback B1, B3, B7, B8, B20, B28A B1, B3, B8 B3, B8
LE910C1-AP - Japan LTE Cat 1 (JP) B1, B3, B5, B8, B28 B1, B5, B8 -
9.2.1.4 TX output power
Class 3 (0.2W, 23 dBm) @ LTE
9.2.2 LTE - single antenna operation notes
Single LTE antenna operation can be supported; however, typically, wireless carriers (Mobile Network
Operators) impose restrictions. Please consult with your carrier before considering single LTE antenna
usage.
For optimum performance of the cellular interface, Eurotech recommends the use of both CELL MAIN and
CELL DIV antenna connectors.
If CELL DIV antenna is not used/connected, Eurotech recommends to disable the diversity function: see
"How to disable/enable the diversity (CELL DIV) function" on page72.
45 / 114