User's Manual

6 Product overview DynaGATE 10-12 User manual Rev. 2-1
6.2 Intended use and not allowed uses of the product
The product is intended for professional use and must be installed by qualified personnel only.
The product must be installed in a secured location, accessible to authorized personnel only (for
example in a cabinet / technical compartment).
6.2.1 Intended use
The DynaGATE 10-12 is a family of IoT Edge Gateways designed to deliver LTE connectivity with 2G/3G
fallback to automotive and lightly rugged applications.
The DynaGATE 10-12 must:
l Be installed in a secured location, only accessible to authorized personnel (for example in a cabinet
/ technical compartment), and not exposed to atmospheric agents
l Be used indoors or in automotive applications*
l Be used with appropriate interconnecting and power cables
l Be used with an external DC power supply source that:
o
Must meet the requirements stated on the identification label of the product
o
Must deliver a maximum current of 2 A
o
Must include an external 2 A fuse on the line coming from the negative terminal.
* Before using the DynaGATE 10-12, versions: -X2, -X5, -X6, in automotive applications in any EU
Member State, switch-OFF the Wi-Fi band: 5150 - 5350 MHz.
6.2.2 Not allowed uses
Do not use the DynaGATE 10-12:
l In railway applications
l In defence applications
l In industrial applications
l Outdoors
l In safety-critical applications
l In environments with potentially explosive atmospheres
l If not installed according to the instructions and warnings contained in this document.
When used in automotive applications in any EU Member State, do not use the DynaGATE 10-12,
versions: -X2, -X5, -X6, with the Wi-Fi band: 5150 - 5350 MHz enabled.
22 / 114