User's Manual
Contents ReliaGATE 10-12 User manual Rev. 2-1
12.18 How to know the programmable pushbutton status 90
12.19 The TPM and the tpm2-tools package 90
12.20 Optional: How to manage the ReliaCELL power supply 90
13 How to compile custom software 91
13.1 How to setup the toolchain 91
13.2 How to use the toolchain to compile custom software 91
14 Eurotech Everyware IoT 93
14.1 Everyware Software Framework (ESF) 93
14.2 The ESF Web UI 94
14.3 The ESF Wires application 95
14.4 Everyware Cloud (EC) 96
14.5 For more information 96
15 Mechanical specifications 97
15.1 Product mechanical dimensions 97
15.2 Mounting bracket mechanical dimensions 98
16 How to install the product 99
16.1 How to install the product using the Mounting Bracket 99
16.2 How to replace the Mounting Bracket with the DIN Rail Mounting Clip or vice versa 100
16.2.1 How to replace the Mounting Bracket with the DIN Rail Mounting Clip 100
16.2.2 How to replace the DIN Rail Mounting Clip with the Mounting Bracket 101
16.2.3 Which screws are used with the Mounting Bracket or with the DIN Rail Mounting Clip 102
16.3 How to install/ remove the product on/ from a DIN Rail 103
16.3.1 How to install the product on a DIN Rail 103
16.3.2 How to remove the product from a DIN Rail 103
17 Power supply. How to turn ON/OFF and reset the product 105
17.1 Power supply specifications 105
17.2 Power IN connector specifications 105
17.3 How to supply power and turn ON the product 106
17.4 How to turn OFF the product 107
17.5 How to reduce the power consumption of the product 107
17.6 How to hardware reset the product 107
18 How to maintain the product 109
18.1 How to safely remove the power supply 109
18.2 How to verify the installation of the product 109
18.3 How to clean the product 109
Appendix 1: Advanced boot options 111
1.1 Advanced boot options availability 111
1.1.1 How to configure a boot option 111
1.1.2 How to gain access to the Bootloader CLI 111
1.1.3 How to change the default boot option 112
1.2 The production fitImage 112
1.2.1 How to define the variants 112
1.2.2 How to manually configure the system to boot from a different DTB within the current fitImage 112
Appendix 2: Expansion connector pin map with respect to device tree pin assignment 115
Notes 117
8 / 118