User's Manual

12 How to manage interfaces in Linux ReliaGATE 10-12 User manual Rev. 2-1
12.2 How to determine the version of Linux installed
To determine the version of Linux installed, enter the following command:
eurotech_versions
Example output:
eth_name_bsp: xxx
eth_vers_bsp: Operating System version
eth_partno_bsp: unknown
eth_serial_number: xxx
eth_model: xxx
eth_partno_epr: unknown
12.3 How the storage memory is exposed
The ReliaGATE 10-12 exposes the storage memory as follows:
l Embedded Storage Memory:
/dev/mmcblk0
l MicroSD Card Memory:
/dev/mmcblk1
12.4 How to manage Wi-Fi and Bluetooth
The ReliaGATE 10-12 exposes the Wi-Fi and Bluetooth interfaces as follows:
l Wi-Fi interface:
wlan0
l Bluetooth interface:
hci0
The ReliaGATE 10-12 exposes the power supply of the Bluetooth as GPIO as follows:
l
/sys/class/gpio/gpio22/value
To manage this GPIO, see "How to drive the GPIOs: the GPIO Utility" on the previous page.
NOTES:
l Turning the Bluetooth OFF and ON, does not automatically restart the daemon
l Wi-Fi power control is handled by the driver and is not user accessible.
72 / 118