User's Manual

ReliaGATE 10-12 User manual Rev. 2-1 17 Power supply. How to turn ON/OFF and reset the product
17 POWER SUPPLY. HOW TO TURN ON/OFF AND RESET
THE PRODUCT
This product is not provided with any ON/OFF switch.
The Power IN connector is the disconnecting means from the power supply network.
17.1 Power supply specifications
Power supply Nominal: 12 or 24 VDC; Range: 9 to 30 VDC with transient protection
Power consumption 2 W idle; 15 W maximum
Peak demand < 15 W
17.2 Power IN connector specifications
The power input is protected against: surge, noise, reverse polarity, over-voltage.
NOTICE
The Power IN connector is NOT protected against short circuit.
Always include an external fuse to protect the product!
The ReliaGATE 10-12 provides the Power IN connector on the rear side.
Connector Layout:
Connector Specifications:
l Base strip, Header
l Gender: Male
l Type: 3-pin, 3.5 mm pitch
Mating Connector Specifications:
l Pluggable screw terminal block
l Gender: Female
l Type: 3-pin, 3.5 mm pitch
l Example:
Manufacturer: Phoenix Contact
Part Number: MC 1,5/ 3-STF-3,5 - 1847068
(or equivalent)
Connector Pinout:
Pin # Signal Type Description
1 Power IN + P Positive power supply input
2 Power IN - P Negative power supply input
3 NC NC Not Connected
105 / 118