User`s manual

DuraMAR 2150 – User’s Manual

System interfaces

Front panel connector layout

USB firmware

upgrade port

HSDPA SIM

LEDs

CPU console

Cisco console

GND

GSM/GPRS SIM

Figure 2. Front panel layout (with protection cover removed)

Service interfaces

Some service interfaces are provided on the front panel of the system under a protection cover. It is possible

to remove this cover by removing the two Torx screws.

Warning:

While the protection cover is removed it is not possible to maintain the IP protection

grade

The service interfaces can be used for debugging, firmware uploading, system configuration and diagnostics:

• SIM card holder for HSDPA

• SIM card holder for GSM/GPRS

• CISCO 3200 ISR serial console port

• ECC serial console port

• USB1.1 port of embedded controller for firmware upgrading

LED indicators

On the front panel of the system there are 6 LED indicators with functions as described below.

LED Number Function Comments

1 Not Connected -

2 Power Good +12 V present

3 GSM activity Software programmable

4 HSDPA activity Software programmable

5 Power #1 On 5 V present

6 Power #2 On 3.3 V present