User`s manual

Am186™CC Microcontroller Router Reference Design User’s Manual
A-1
Appendix A
Default Jumper Settings
Table A-1 contains the default jumper settings.
Table A-1. Default Jumper Settings
Jumper
Number
1
1. Pin 1 of JP1 is the pin farthest from the TIP connector. Pin 1 of JP5 is
the pin farthest from the high-speed serial port connector.
Position
JP1 1-2 NC
2-3 Connected
JP5 1-2 NC
2-3 Connected
about.book Page 1 Wednesday, July 21, 1999 11:10 AM