User`s manual

Am186™CC Microcontroller Router Reference Design User’s Manual
1-5
Connecting a Test Interface Port
To connect the test interface port (TIP) debug board to the Am186CC
microcontroller router reference design:
1. Plug the TIP connector into the TIP board with the tab facing towards the left.
2. Plug the other end of the connector into the Am186CC microcontroller router
reference design TIP connector (see P10 at location L-7 in Figure 2-1 on page
2-3) with the tab facing up.
about.book Page 5 Wednesday, July 21, 1999 11:10 AM