Instruction Manual
Floodlight - PIR Sensor
Model: 20W & 30W
Installation Instructions
All installations must be carried out by a qualified electrician following local regulations. Make sure that the power is switched off before
installation. Please read and follow the ‘Installation instructions’ and ‘Safety instructions’ sections carefully before commencing installation.
Installation of this model can change from time to time please read instructions every time before installation. For detailed specification, please go to our website eurotechlighting.co.nz
Code: Colour:
Dimensions
(mm):
IP Rang: Kelvins: Lumens: Material: Voltage: Waage:
FLOOD20WPIR
Black
120L x 90W x
34D
IP65 4000K
2000lm
Powder coated
aluminium
230V
20W
FLOOD30WPIR
190L x 135W x
56D
3000lm 30W
For detailed specification, please go to our website eurotechlighting.co.nz
Installaon Instrucons
1.
Ensure mains power supply has been switched off.
2.
Mount the fitting bracket to your building element with the screws provided.
3.
Connect mains power to the fitting and terminate the connection in an IP rated junction box.
4.
Set the fitting is in its desired direction and tighten the screws.
5.
Turns mains power back on and test that the fitting works properly.
41 2 5
Saey Instrucons
Read these instructions carefully before commencing installation.
1.
The light source contained in this luminaire shall only be replaced by the manufacturer or this service
agent or a similar qualified person.
2.
This LED luminaire must be installed by a licensed electrician ONLY following all local regulations.
3.
Ensure that the cables will not be squeezed or damaged by sharp edges.
4.
Clean the light with a soft cloth and a standard PH-neutral detergent.
5.
Misuse of/or changes to the appliance shall void all warranties.
6.
Do not install on a surface that is not suitable or deformed.
7.
Do not install on or above a surface with a high temperature.
8.
There should not be any materials that are corrosive, explosive.
Product Informaon
Product Visual - 30WProduct Visual - 20W