User guide

Unset/Reset
3GS User Guide
9
User Guide
Unset/Reset
Select the Unset/Reset option to disarm the system when you
enter the premises, or to cancel alarms, bells etc. after an alarm
activation.
This will put the 3GS into Unset mode (i.e. normal daytime
operation). The system alarm outputs (buzzers etc.) which had
been activated are reset to normal.
After an Alarm Activation
After an alarm activation proceed directly to the control panel
enter the code and press Unset.
The display will show:
Followed by:
followed by the cause of the alarm, i.e. which zone has been
opened.
Example:
Alarm alert message:
Zone alert message:
These messages will be flashing.
To clear flashing (Alert) messages key in your code plus 0 (see "Accept All Alerts" on page 10.)