User guide

Change your own ID
18 3GS User Guide
Change your own ID
This option allows the user to
change the ID code normally
assigned to them by the Master
User.
When the option is selected, the
user is prompted to enter a new
4-digit code. To avoid duplicate
codes, a second choice of code
is requested.
Once both codes have been
entered the system will either
reject or accept the user’s
choice. If rejected the user must
repeat the procedure and enter
two new codes. If accepted, the
system will assign one of them
(chosen at random) and will
indicate which code is to be
used.
This option is cancelled after use
so each user has only one
opportunity to change their
own code. The Master user may,
of course, grant the option again
if required. Once chosen the
code is completely private.
Remember the two codes you
have entered! The one chosen
by the system as your new code
will be indicated by either ‘1’ or
‘2’.
Once changed, test your code to
ensure that the system has
accepted it. In not, consult your
Master User or installer.