Installation guide

and alarm outputs for each individual area. These dry contacts may be used to show area status

on an LED display or to allow the system to be monitored by a central/monitoring station using a

digital communicator or other transponder-type device. If the central/monitoring station is

equipped with the EUROPLEX 4100 DVACS

(tm)

receiver, the C-LEMs are unnecessary as all

zone, user, arm/disarm, and diagnostic information will be transmitted to the station.

The following chart summarizes the area number and the associated C-LEM addresses:

AREA ARMED ALARM EXIT BUZZER

121 31 41

222 32 42

323 33 43

424 34 44

525 35 -

626 36 -

727 37 -

828 38 -

COMMON 29 39 -

SYSTEM OUTPUTS common to all areas:

Timed Bell (panel relay) 7

Latched Internal Bell (C-LEM) 10

Dialler/Transponder (panel relay) 1 (fail alarm)

This completes the set-up procedure for an 8-area installation.