Installation guide

16
2. The coding table on page 26 shows the DIL switch settings for D-LEMs, C-LEMs, and
COMBO LEMs. (Refer to page 23 for information on C-LEMs.) The maximum useable zone
number, 100, comes from D-LEM address 50. The chart reflects this with the notation LIMIT of
3100. The table also shows C-LEM address 50 as this is the highest useable C-LEM/COMBO
LEM address.
3. The coding table on page 27 shows the DIL switch settings for Q-LEMs. (Refer to pages 21
and 22 for information on Q-LEMs.) The minimum useable quad address of 2 provides for zones
3, 4, 5, and 6. A D-LEM must be used to provide for zones 1 and 2. The maximum useable quad
zone number, 98, comes from a Q-LEM address of 48. The chart reflects this with the notation
LIMIT of 3100. A D-LEM must be used to provide for zones 99 and 100.