User guide

Issue 04 August 2004 3GS Version 5 User Guide 7
M
ENU OPTIONS
The system is programmed using the Help menu options. You can use
these menus to:
●
Disarm the system and reset all warning devices
●
Enable/disable User 1 (engineer)
●
Remove system display messages and silence the buzzer
●
Part set the system and Unset/Disarm an area
●
Half set the system and Set/Arm an area
●
Full set the system
●
Reset the system following an alarm
●
Set the system date and time
●
Change existing user codes
●
Set up new users
●
Set up a new area system
●
View system log
●
Adjust the system for summer/winter hour change (daylight saving
time)
●
Overide system faults on remote/timed FULL SET.
●
Isolate a troublesome zone that is, for example, preventing the
system from arming
All of these options are accessed by entering your 6 digit CODE
followed by the HELP key.
Your installer will have configured your own unique 6 digit CODE,
which will allow you to display and scroll through the options available
to you.
An option is selected by pressing the YES key .
Use the UNSET key to move to the next option
Use the PART key to move back
To exit without selecting an option, use the NO key
Note Only options which have been assigned to a user are displayed.
The Master user will have all options.
Note Once the help routine is entered, a selection must be made within
90 seconds, otherwise the system will exit from this menu.
Note The hash button acts as an ENTER key for the keypad.