User guide

42
Unsetting the System - DD243
With the DISABLE KEYPAD variable set to YES, on opening the initial entry door, the entry buzzer will sound as normal.
At the Portable ACE RKD, present the card/token and the system will unset. If during the entry timer, the keys of the
Portable ACE RKD or any other RKD Node on the system are pressed, the following message will be displayed:
When the DISABLE KEYPAD variable is set to YES ALL, system keypads are disabled in this way. The keypads will
remain disabled until the expiry of the entry timer, at which time an Unconfirmed Alarm will be generated and the
keypad will be enabled to allow the system Unset. The DISABLE KEYPAD variable is linked to the Common/Premises
area only. Once the Common/Premises area is unset, other areas will not be disabled and may be used as normal – see
the following status table.
Disable
Keypad
Variable
SYSTEM STATUS STANDARD RKD PORTABLE ACE RKD
Keys
enabled
Keys
disabled
Keys
enabled
Keys
disabled
Card/Fob
Active
NO UNSETTING ENTRY TIMER RUNNING YES NO YES NO YES
NO UNSETTING ENTRY TIMER EXPIRED YES NO YES NO YES
NO PREMISES UNSET AREAS SET YES NO YES NO YES
NO UNSET YES NO YES NO YES
NO UNSET DOING USER FUNCTIONS YES NO YES NO YES
NO SETTING YES NO YES NO YES
YES UNSETTING ENTRY TIMER RUNNING NO YES NO YES YES
YES UNSETTING ENTRY TIMER EXPIRED YES NO YES NO YES
YES PREMISES UNSET AREAS SET YES NO YES NO YES
YES UNSET YES NO YES NO YES
YES UNSET DOING USER FUNCTIONS YES NO YES NO YES
YES SETTING YES NO YES NO YES