User guide

Issue 04 August 2004 3GS Version 5 User Guide 41
Enter the portable ACE RKD Node number and press ENTER to accept.
The display will show:
Scroll down the user list using FULL and up the user list using UNSET until the correct User No is displayed, and press
ENTER to select.
The display will show (User No 4 as an example):
Present the card/token for that user to the left hand side of the RKD as shown below:
Once assigned, the display will show:
The number displayed being the card reference number.
If when assigning a Portable ACE user, a card already assigned is presented, the display will show:
In such a case, select YES to reassign to a different user and NO to present a different card for assigning.
Operation
When used in non DD243 and DD2243 configuration, the card or token assigned to the user represents their 6 digit
number. All ACE functions therefore can be accessed by presenting the card/token whereas previously, the user
number would be entered.
Set the System
Present the card/token and select FULL. The system will full set.
Unsetting the System - non DD243
With the DISABLE KEYPAD variable set to NO, on opening the initial entry door, the entry buzzer will sound as normal.
At the Portable ACE RKD, present the card/token and select UNSET.
During the entry time, the keys of the Portable ACE may also be used to unset the system in the normal way.