User guide

28
3GS A
CCESS
C
ONTROL
3GS can control up to 64 doors with internal and external readers, and 10,000 cards/tokens per system.
Access Control Readers
A variety of reader types are supported:
PIN code, magnetic stripe cards, proximity cards, ‘hands-free’ cards or a combination of card and PIN
code.
LED displays
Card readers may display a variety of LED indications:
Setting the system using access cards
3GS allows for cards to control setting/arming and unsetting/disarming of the complete alarm
system, or parts of it (i.e. areas). Please consult your 3GS installer for details.
●
Unset/Disarm inside the door: If the area is set/armed, then when a card with this
function is presented to the entry reader, the user is granted access to the door. When the
door is opened it will start the entry timer. This allows the cardholder to unset/disarm the
system by presenting the card to the exit reader.
●
Unset/Disarm outside the door: If the area is set/armed, then when a card with this function is swiped on the
entry reader, the user is granted access to the door. When the door is opened it will unset/disarm the system or
area immediately.
●
Set: If the area is unset/disarmed, then the cardholder can set/arm the area/system by presenting the card to the
exit reader and then presenting it to the entry reader during the FUNCTON ENABLE TIME. Alternatively the
cardholder can use the SET button to set/arm the area/system after pressing the card to the exit reader.
Note Please consult with your installer before operating these functions
Asset Protection
3GS Access Control can also be configured to protect assets (such as PCs). By locating tokens placed inside the asset,
and fitting ‘hands-free’ readers at doors. 3GS can be set up to report the illegal removal of the assets. Please consult
your installer for details.
3GS allows for visitor cards, holidays, a multitude of access levels, anti-passback, car park control, roll call of building
occupants and much more. Consult your 3GS installer for more details.