User guide

Issue 04 August 2004 3GS Version 5 User Guide 11

ART

NSET

NDIVIDUAL

REA

Your system will be set up as either:

●

a standard alarm system with one alarm area, or

●

a multi-area system, with up to 30 separate alarm areas

within one.

A standard alarm system is set/armed using the Part, Half, and

Full procedures.

The Part and Half keys are used to unset/disarm and set/arm

individual areas within the multi-area system.

Part Set

With a standard alarm system, you can isolate particular areas

of the premises and set/arm these areas independently of the

rest of the system.

Part Set allows you to protect the perimeter of a premises

while allowing free movement through the exit and access area

(e.g. from door, hall).

This would typically apply to the day or evening operation of

the system when people are on the premises and using the

common exit. There is free access to the areas being used while

the rest of the building is armed.

There are no entry or exit times associated with this mode and

protection is applied instantly.

The display remains blank and will only change to show alert and warning messages.

If selected while entering the building while the entry timer is running, the entry mode is cancelled and the buzzer is

silenced.

●

If selected by mistake refer to “Unset/Reset”.

●

If unable to set/arm refer to “Unable to Set”.