User guide

Panelman EXE Files

Panelman 3GS is designed to provide easy access to all

programming parameters of Europlex alarm panels. The

Panelman 3GS disk contains the following three .EXE files :

PMAN.EXE

This file is the Panelman 3GS program file and should be

installed on the PC hard disk. Panelman 3GS can be used

on-line while in communication with the panel or off-line

with no communications with a panel. Individual files can be

set up for specific panels or for general installation sites.

MAKE_LIT.EXE

As new hardware applications are developed, the 3GS system

software will be upgraded to facilitate this. For this reason it

will be necessary to configure the Panelman 3GS program to

recognise new versions of 3GS Software. You can achieve this

by running the MAKE_LIT program from the PC hard disk.

SETUSERS.EXE

This file allows the Master User to set-up ID codes and to

assign options to the system users. SETUSERS should be run

from the PC FLOPPY DRIVE after Panelman 3GS is installed

and prior to the handover of the system to the end user.