User guide

Main Menu
Monitor HUA Radio PAs
This option provides the facility to view the configuration of
HUA Radio PA units on the system. The data you are viewing
in this menu can be entered from within Panelman in the
following menus :
! Radio PA Configure (page 18)
! Radio PA Button Maps (page 18)
! Pager Configuration (page 19)
The display shows RPA Number, Description and Serial
number, along with the Pager receiver unit address. The last
button activation recorded and battery strength are also
displayed.
Use the Page Up/Down keys to scroll through Radio PAs on
the system. Data is presented for each RPA (provided it is
recognised by the system - see note below).
If an RPA button is activated while it is displayed in this
menu, the Last Button or Battery OK data may change. To
update the data and refresh the display press
f after the
button activation.
? Note : In order for an RPA to be recognised by the system,
a serial number must be entered. This may be achieved in
Panelman by entering the correct serial number in “Radio
PA Configure”. Alternatively it may be entered at the 3GS
RKD (see 3GS Programming Manual).
Control Panel
23