Owner`s manual

Document ID:06080001 Rev: G Technical Support: 800-626-6912 Page 13 of 24
Attaching the Seat Back
Your pedicure spa shipped with the seat bottom and seat back already attached to the base. Follow
these instructions to connect the seat back to the pedicure spa:
Forte’ Altera
Step 1: Remove the hitch and clevis pins located
on the seat back mounting bracket on the back of
the chair.
Step 1: Remove the hitch and clevis pins
located on the seat back mounting bracket on
the back of the chair.
Step 2: Slide the seat bracket into the black end
on the linear actuator, and line up the holes.
Step 2: Line up the hole on the seat bracket with
the hole on the cylinder end.
Step 3: Slide the clevis pin through the holes and
secure by inserting the hitch pin through the
small hole on the clevis pin.
Step 3: Slide the clevis pin through the holes
and secure by inserting the hitch pin through the
end hole on the clevis pin.