Owner`s manual

H Series Vent Free Gas Fireplace EuropeanHome.com

ROUGH INSTALLATION

ROUGH OPENING

Dimension HVF-42-3S HVF-60-3S HVF-72-3S

A (Width) 49” 62” 74”

B (Height) 34½” 34½” 34½”

C (Depth) 18½” 18½” 18½”

Table 4. Rough Opening Dimensions by Model

INSTALLING THE FIREPLACE

The H Series replaces must be placed on a sturdy and level surface. It can be placed on the oor or a raised

platform made ONLY of wood or non-combustible materials - do not place the replace on carpet or vinyl

tile.

1. Set the replace into position. Framing material can touch the standos at the sides and rear of the

cabinet but do not place anything between the framing and the standos.

2. Make sure the replace is both level and square.

3. Secure each of the three top standos (angle braces) into the wall framing. Use the fasteners required by

your local building code.

4. Compete the framing above the replace.

Figure 6. Rough Opening for HVF-42-3S, HVF-60-3S, HVF-72-3S

Three Standos MUST Be Se-

curely Attached To Framing

Figure 7. HVF-42-3S, HVF-60-3S, HVF-72-3S Standos