Instruction manual

Canopy Installation and Operation Manual

Home Appliances – Oct 2013

(3). Installation

If the model without Glass:

3.1 The cooker hood shall be placed at a

distance of 65-75cm (26-30inch) from the

cooking surface. See Pic 1.

3.2 Install the hook on a suitable place once the

installation height is fixed, and keep it in line. The

fixed position of the inside chimney bracket is

the place of chimney. See Pic 2.

3.3 Fix one-way valve on the hood and connect

the extensible pipe to the one-way valve. See Pic 3.

3.4 Put the cooker hood on the hook. See Pic 4.

3.5 Use clamp to fix the T-piece valve on the extensible pipe. See Pic 5.

3.6 Fix plate on the outer chimney, and be sure that the inside chimney can be

adjusted the height in it freely, See Pic 6.

3.7 Install the chimney and screw the T-piece metal outlet to the inside chimney, See

Pic 7 and 8.

3.8 Adjust the height of the inside chimney to the position of the inside chimney

bracket and fix on it by screw, after adjusting the position, fix the body with safety

screw. See Pic 9.

Note: The two safety vents are positioned on the back casing, with diameter

of 6mm.