User Manual

Island Canopy Installation Operation Manual

- 7 -

3. Press button once more at the medium position, the

is displayed on the display screen, and the is the high

position.

4. Go on pressing button at the high position, the is still

displayed on the display screen, and the motor works normally.

It is still at high position at this time.

4. Decreasing Power and Off position touch button “ “.

1. Press “ ” button once, the motor is adjusted to a lower

position, and the LCD screen displays that position in the

meantime; If it is decreased continuously to the position

indicating no segments, then, this is the OFF position for the

rangehood and the motor will stop.

5. “Timer” touch button “ ”:

1. Setting the Time: In the case of neither light nor motor working,

the “Timer” button is used for setting the time.

① Long press timer button for 2-3 seconds, time segment

, and the first two hour bit segment flash, use

button for the digit increase, and use button for the

digit decrease. Namely: The variable is 01 each time it is

pressed; the hour segment is with the largest digit of 23. If it

exceeds 23, button is null and void. If it is equal to 00,

then, the button is null and void.

② Press the timer button for the 2

time , time segment

, and the last two minute bit segment flash, use

button for the digit increase, and use key for the digit

decrease. Namely: The variable is 01 each time it is

pressed; the minute segment is with the largest digit of 59.

If it exceeds 59, button is null and void. If it is equal to 00,

then, the button is null and void.

③ Press the timer button for the 3

time, and it is the time

setting exit and confirm key.

④ Long press timer button for 2-3 seconds under this

operation mode, and it is for the hour setting; Press it for

the 2

time: Setting for the minute; Press it for the 3

time:

For the time setting exit and confirm, and it will be

repeated again and again (if the 1

time pressing doesn't