User Manual

Island Canopy Installation Operation Manual
- 5 -
INSTALLATION – Re-circulated installation
The IA150IGRK re-circulating kit will need to be purchased to
perform this type of installation. The IA150IGRK consists of the
following:
1 x CF120 carbon filter
I x piece of flexible ducting
1 x re-circulating t-piece
Installation for re-circulating uses the same procedures as those for
ducted installation with exception of the need to take the ducting
to the outside atmosphere:
1. Follow steps 1, 2 of ducted installation.
2. Connect the extensible pipe to the re-circulating t-piece. see pic
10.
3. 4pcs of ST4*8 screws will be used to fix the re-circulating t-piece to
the internal chimney. see pic 11.
4. Follow step 4, 5, 6, 7, 8 of ducted installation.
5. Fit the carbon filter to the underside of the motor housing in the
support brackets located above the baffle filters.