Operating instructions

11
PCI "Campanil"TR 259 Analogic (Fig. 8A)
Fig. 8
INSTRUCTIONS FOR USE OF CONTROL DEVICES
(ACCORDING TO THE MODELS)
Setting the clock
Press the control knob and turn clockwise.
Alarm programme adjustement
Turn the knob clockwise without pressing it in. At the end of the
programmed time an alarm will sound. To cancel it, turn the knob
to the bell.
5
10
15
20
25
35
40
45
50
55
30
XII
XI
X
IX
VIII
VII
VI
V
I
II
III
IV
ELECTRONIC TIMER FOR COOKER (Fig. 9)
Functions
On
The display flashes.
Time setting
Press the left button.
Set the time with buttons + and -.
This function remains activated 7 seconds after the last +/-
operation.
Timer setting
This function is permanently activated and it will be immediately
set with +/- buttons.
During setting the units are 10 seconds.
During count down the timer takes priority on the display.
The units are seconds.
The maximum time is 99 minutes.
The relay contact (when available) is closed during the count down
only.
Reset timer
Press + and - buttons together and release + button first.
Signal
The signal after time out will stay 7 minutes if it has not been reset
with the + button (one touch only).
Signal frequency
When the display shows the time of day, the signal frequency can
be selected by pressing the - button. Three different frequencies
are selectable.
Fig. 9
1 Time of the day
2 Timing and insertion
3 Signal timng and insertion
Fig. 8A
MINUTES COUNTERS (Fig. 8)
Turn the knob clockwise to set the desired cooking time.
The minutes minder can be adjusted from 1 to 60 minutes.
A sound signal will inform you that the chosen time is up.