User Manual 8/4.
Product / Installer details For future reference we suggest that you staple a copy of your purchase receipt here and complete the below so the information is always at hand.
Dear Customer, Congratulations on the purchase of your new product from Home Appliances Pty Ltd. We recommend you please take some time to read the instruction manual thoroughly to familiarise yourself with the functionality and operations to ensure optimum performance of your new appliance. After reading the manual, please store it in a safe and accessible location for future reference.
Thank you for choosing this product. This User Manual contains important safety information and instructions on the operation and maintenance of your appliance. Please take the time to read this User Manual before using your appliance and keep this book for future reference.
CONTENTS 1.SAFETY INSTRUCTIONS................................................................................. ................1 1.1. General Safety Warnings...............................................................................................2 1.2. During Use ....................................................................................................................7 1.3. Packaging and Environment..........................................................................................
1. SAFETY INSTRUCTIONS Operating voltage / frequency (V/Hz) (220-240) V~/50Hz Total current (A) 10 Water pressure (Mpa) Maximum 1 Mpa / Minimum 0.1Mpa Total power (W) 2200 Maximum washing capacity (dry laundry) (kg) 8 Maximum drying capacity (kg) 4,5 • Do not install your machine on a carpet or such grounds that would prevent the ventilation of its base.
NOTE: For softcopy of this user manual, please contact following address: “washingmachine@ standardtest.info”. In your e-mail, please provide the model name and serial number (20 digits) which you can find on the appliance door. To ensure your safety and the safety of others, please read the following safety precautions before using or installing your Washer Dryer. Your machine is for domestic use only. Using it for commercial purposes will void your warranty. 1.1.
• • • • • • • • • • • softener or detergent in the drawer at the beginning of each wash. Unplug your Washer Dryer and switch off the water supply if the Washer Dryer is left unused for a long time. We also recommend that you leave the door open to prevent build up of humidity inside the Washer Dryer. Some water may be left in your Washer Dryer as a result of quality checks during production. This will not affect the operation of your Washer Dryer.
• • • • • • • have to do so, quickly remove all of your laundry and immediately spread the items on an appropriate surface to allow them to cool. The appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by a utility.
water while your Washer Dryer in running. The high temperatures involved pose a burn risk. • Open the door fully after the drying process. Do not touch the door glass. It will reach high temperatures and pose a burn risk. ELECTROCUTION RISK Do not connect your Washer Dryer to the mains electricity supply using an extension lead. • A damaged power cord/plug can cause fire or give you an electric shock. When damaged it must be replaced, this should only be done by qualified personnel.
• • • • • • • should be washed in hot water with an extra amount of detergent before being dried in the tumble dryer. Do not use a detergent ball/device if you have selected a washing and drying programme as this may cause a fire hazard. Do not dry your laundry under the conditions specified below as they present a fire risk. • If the laundry is not washed. • If oil based stains are not pre-treated before beginning a washing or drying programme. • Laundry which has been cleaned with industrial chemicals.
• Do not lift your Washer Dryer using the door or detergent drawer. • Make sure hoses and cables do not cause a trip hazard. To avoid risk of injury, please take care when moving your Washer Dryer. It is heavy and we recommend that a minimum of two people move your Washer Dryer. Child Safety • Do not allow children to play with the machine. • Do not leave children unattended near the machine. They might lock themselves in the machine.
is only intended to wash and dry items which are specified by the manufacturer to be machine washable and dryable on the label and textiles composed of hand washable wool or wool blend fabrics as well as satin, lace, silk and other handwashable garments. Do not use your Washer Dryer for any purpose not expressly specified in this user guide.
1.4. Savings Information Some important information to get the most efficient use out of your machine: • The amount of laundry you put in your Washer Dryer should not exceed the maximum amount indicated. Avoid overloading to allow your machine to run more efficiently. • Not using the pre-wash feature for normal and lightly soiled laundry will save electricity and water consumption.
2. TECHNICAL SPECIFICATIONS Maximum washing capacity (dry laundry) (kg) 8 * Maximum drying capacity (kg) 4,5 Spin speed (rpm) 1400 Number of programmes 15 Operation voltage / Frequency (v/hz) 220-240 / 50 Water pressure (mpa) Maximum: 1 Minimum: 0.1 Dimensions (HxWxD) (mm) 845x597x582 * You should not put dry laundry in your machine for drying. AS/NZS.2040 standard-compliant control programmes Washing programme: 2.
3. OVERVIEW OF YOUR MACHINE 3.1. General Appearance 4 3 2 5 1 6. Door 7. Pump Filter Cover 8. Power Cord 9. Drain Hose 10. Transport Screws 11. Adjustable Feet 12. Plastic Drain Hose Holder: (Do not remove the holder; the operation of the machine will be affected). 4. SETTING UP YOUR MACHINE Your machine must only be installed by an authorised service company. 6 4.1. Remove the Transit Screws X4 7 8 1 2 3 4 9 X4 10 11 11 1. 2. 3. 4. 5.
should be stored for future use. 4. Insert the plastic blanking caps from the accessories bag into the gaps left by the transit screws. height of the machine. Turn the feet anticlockwise to decrease the height of the machine. • Once the machine is level, tighten the plastic adjustment nut. • Never insert cardboard, wood or other similar materials under the machine to level it. • When cleaning the ground on which the machine is located, take care not to disturb the level of the machine. 4.2.
low voltage will cause the life cycle of your machine to be reduced and its performance to be restricted. 3/4” 10 mm 4.4. Water Inlet Connection 2 • Turn the cold water supply on and check for any leaks. • Water flow with pressure of 0.1-1 Mpa will allow your machine to operate at optimum efficiency (pressure of 0.1 Mpa means that more than 8 litres of water per minute will flow through a fully opened tap). • Ensure that the the hose is not trapped, kinked, twisted, folded or crushed.
• 5.1. Detergent Drawer General View Make sure that the water drain hose is not bent, buckled, crushed or extended. 5. CONTROL PANEL OVERVIEW 1 2 3 4 1. Detergent drawer 2. Programme Dial: Use the programme dial to select the washing / drying programme for your laundry. Turn the programme dial clockwise or anticlockwise to select the required programme. Make sure that the dial is pointing exactly at the selected programme. 3.
5.3. Programme Dial 5.2. Sections Main wash detergent compartment: This compartment is for liquid or powder detergents or limescale remover. The fluid detergent level plate is supplied inside your machine. (*) (*) Specifications may vary depending on the machine purchased. Fabric conditioner, starch, detergent compartment: This compartment is for softeners, conditioners or starch. Follow the instructions on the packaging. If softeners leave residue after use, try diluting them or using a liquid softener.
6.3. Placing Laundry Into the Machine pockets; if so, remove them. WARNING: Any malfunction occurring due to foreign materials damaging your machine are not covered by the warranty. • Close zips and fasten any hooks and eyes. • Remove the metallic or plastic hooks of curtains or place them in a washing net or bag. • Reverse textiles such as pants, knitwear, t-shirts and sweat shirts. • Wash socks, handkerchiefs and other small items in a washing net. • Open the loading door of your machine.
Follow the instructions on the detergent packaging when determining the amount of detergent to use for your laundry. • The higher the degree of hardness of the water, the more detergent you will need. • The amount of the detergent you will use will increase as the amount of your laundry increases. • Put the softener in the softener compartment in the detergent drawer. Do not exceed the MAX level, otherwise the softener may flow into the washing water.
7.1. Half-Load Detection System Your machine features a half-load detection system. If you put less than half the maximum load of laundry into your machine it will automatically set the half-load function, regardless of the programme you selected. This means that the selected programme will take less time to complete and will use less water and energy. maximum spin speed for that programme is automatically selected.
NOTE: If one of the above drying level symbols is not displayed when you press the Dry Level button, that drying option is not available for the selected programme. If you want your laundry dried for a fixed period of time at the end of the washing cycle: • Press the drying level button to select the desired drying duration. • When you press the drying level button, the level 1 “ ”, level 2 “ ” and level 3 “ ” symbols will be shown on the display.
4.
5. Delayed Start 7. Child Lock Delay Timer • Press the Delay button once. • “1 h” will appear on the display. • symbol will flash on the The electronic display. • Press the Delay button until the desired delayed time appears on the display. • If you have skipped the delay time you wanted to set, keep pressing the Delay button until the desired delay time is displayed again. • For the delay timer function to work, you must press Start/Pause button.
7.3. Finishing Programme Your machine will stop by itself as soon as the programme you have selected finishes. • “END” will flash on the electronic display. • You can open the machine’s door and remove the laundry. • Leave the door of your machine open to allow the inner part of your machine to dry. • Switch the programme dial to STOP position. • Unplug your machine. • Turn the water tap off.
Programme Washing temperature (°C) Maximum washing / drying capacity (kg) Detergent compartment Programme duration (Min.) 8. PROGRAMME TABLE Laundry type / Descriptions HEAVY 90° C 90° 8 / 4,5 2 201 Hevaily soiled cotton laundry. (Underwear, bed sheets, tablecloths (towels, max. 4 kg) COTTON ECO 40°e 8 / 4,5 2 240 Normally soiled cotton laundry (Underwear, bed sheets, tablecloths (towels, max.
9. MAINTENANCE AND CLEANING OF YOUR MACHINE 9.2. Water Inlet Filters 9.1. Warning 1 2 Turn your mains power supply off and remove the plug from the socket before carrying out maintenance and cleaning your machine. Turn off the cold water supply before starting maintenance and cleaning your machine. CAUTION: Do not use solvents, abrasive cleaners, glass cleaners or all-purpose cleaning agents to clean your Washer Dryer.
accumulated residue. To remove the detergent drawer: • Pull the drawer forwards until it is fully extended. • Gently press down on the detergent drawer (as shown above) and pull the drawer from its housing. • Clean the drawer with water and a soft brush. • If there is any residue in the drawer housing, remove with a soft brush. Take care to prevent any residue from dropping into the machine. • Dry the drawer thoroughly and slide it back into the housing.
10. FLUSH STOPPER / BODY / DRUM 1 1. Flush stopper Remove the detergent drawer and disassemble the flush stopper. Clean thoroughly to completely remove any softener residue. Refit the flush stopper after cleaning and check that it is seated properly. 2 3 2. Body Use a mild, non-abrasive cleaning agent, or soap and water, to clean the external casing. Wipe dry with a soft cloth. 3. Drum Do not leave metallic objects such as needles, paper clips, coins etc. in your machine.
11. TROUBLESHOOTING Repair of your machine should be carried out by an authorised service company. If your machine requires repair or if you cannot solve an issue with the information provided below, then you should: • Unplug your machine from the mains power supply. • Turn off the water supply. • Contact the nearest authorised service company. FAULT POSSIBLE CAUSE It is not plugged in. Your machine will not start. Your machine does not discharge Your machine vibrates.
FAULT POSSIBLE CAUSE TROUBLESHOOTING There is detergent residue on your laundry after washing Non-dissolving particles of some detergents may appear on your laundry as white spots. Perform an extra rinse, or clean your laundry with a brush after it dries There is detergent residue on your laundry after washing There is untreated oil, cream or laundry Use the amount of detergent as instructed on the packaging in the next wash No fault. Unbalanced load control system has been activated.
52232708
For all product enquiries (including warranty support), please contact our Customer Care team on 1800 444 357 or via email: customercare@hapl.com.
