Technical information
0
1
2
3
4
6
5
OPERATION
Before first use
Remove packaging, empty the drawer, clean the interior of the oven and the hob.
Take out and wash the oven fittings with warm water and a little washing
-up liquid.
Switch on the ventilation in the room or open a window.
Heat the oven (to a temperature of 2
50
, for approx. 30 min.), remove any stains and
wash carefully; the heating plates of the hob should be heated for around 4 min.
without a pan.
When heat the oven for the first time, it is normal phenomenon to give off smoke and
peculiar smell. This will disappear about 30 minutes later.
How to use the heating plate
The level of heat can be adjusted gradually by turning the appropriate knob to the right
or left.
Switching on the plate results in a signal light on the control panel turning on.RED
Switching off
MIN.
Warming up
Stewing vegetables,
slow cooking
Cooking soups,larger
dishes
Slow frying
Grilling meat,fish
MAX.
Fast heating up,
fast cooking and frying
An appropriately selected pan saves energy.
A pan should have a thick, flat base with a diameter equal to the plate diameter, as in that
case heat is transferred most efficiently.
Caution!
Ensure the plate is clean – a soiled zone does not transfer all of the heat.
Protect the plate against corrosion.
Switch off the plate before a pan is removed.
Do not leave pans with prepared dishes based on fats and oils unattended on the switched
– on plate; hot fat can spontaneously catch fire.
Oven functions and operation
Oven is controlled by the function knob
and the temperature selection knob.
Temperature selection knob
Function selection knob
Caution!
When selecting any heating function
(switching a heater on etc.) the oven will
only be switched on after the temperature
has been set by the temperature regulator
knob.
Possible settings of the oven
function knob
Separate oven lighting
By setting the knob to this position the
lighting inside the oven is switched on, e.g.
use when washing the oven chamber.
Caution!
At this oven function knob position.
The oven is not being warmed up.
Bottom and top heaters on
Setting the knob to this position allows the
oven to be heated conventionally.
OPERATION
Fan grill heaters
0
50
1
00
15
0
20
0
2
50
When ANY hotplate is activated the RED signal light will remain on.
Reference cooking guides can be
on pages 17 & 19 of this
found
manual.
Reference cooking guide can be found
page 21 of this manual.on
(Grill,the top heater and fan)
When the knob is turned to this position,
the oven activates the grill,top heater
fan function in pratice,this function
the grilling process to be speeded
improvement in the taste of the
should only use the grill with
shut.
and
allows
and an
dish,you
the oven door
11
10
When ANY oven function is activated
the ORANGE signal light will turn on,
when temperature selected is reached
the signal light will go off, this may
occur several time when the oven
is operated.










