Instruction manual

CanopyInstallationandOperationManual
Home Appliances – November 2012
7
If the model with Glass:
3.1 The cooker hood shall be placed at a
distance of 65-75cm (26-30inch) from the
cooking surface. See Pic 1.
3.2 Install the hook on a suitable place once the
installation height is fixed, and keep it in line. The
fixed position of the inside chimney bracket is
the place of chimney. See Pic 2.
3.3 Fix one-way valve on the hood and connect
the extensible pipe to the one-way valve. See
Pic 3.
3.4 Put the cooker hood on the hook. See Pic 4.
3.5 Put the glass according to the lead direction
and way on the cooker hood, and then use the screws to fix the glass. See Pic 5.
3.6 Use clamp to fix the T-piece valve on the extensible pipe. See Pic 5.
3.7 Fix plate on the outer chimney, and be sure that the inside chimney can be
adjusted the height in it freely, See Pic 6.
3.8 Install the chimney and screw the T-piece metal outlet to the inside chimney, See
Pic 7 and 8.
3.9 Adjust the height of the inside chimney to the position of the inside chimney
bracket and fix on it by screw, after adjusting the position, fix the body with safety
screw. See Pic 9.
Note: The two safety vents are positioned on the back casing, with diameter
of 6mm.