Instruction manual

CanopyInstallationandOperationManual

Home Appliances – November 2012

(8) LIGHT REPLACEMENT

8.1 Halogen lighting:

Use a small flat blade screwdriver to remove the inner stainless steel ring (when

removing the inner ring, do so carefully so not to damage the range hood, as the

glass lens could easily fall out of the inner ring) ; and remove carefully the halogen

globe with a new one.

8.2 LED lighting:

NOTE: Power needs to be disconnected for replacement of LED lights as access is

required to loosen the cord restraints to undergo this procedure. The LED lamp

assembly should be ordered directly from the supplier of the canopy hood.

Remove the filters, and push the light downwards, and unplug the wiring connector.

Reverse the procedure to place the new light assembly into position.